đźšš Free Worldwide Shipping on All Orders!Shop Now
HomeStore

Brushless In-Line 5.0 Spur Gear Pump with Variable Speed Controller

Product image 1

Brushless In-Line 5.0 Spur Gear Pump with Variable Speed Controller

Brushless In-Line 5.0 Spur Gear Pump with Variable Speed Controller

*This product is manufactured to order. Expedited or express delivery is not available.

 

  • Fuel injected engines: GAS
    up to 3400 FWHP – naturally aspirated
    up to 2600 FWHP – forced air induction
  • Carbureted engines: GAS
    Up to 3600 FWHP – naturally aspirated
    Up to 2700 FWHP – forced air induction
  • Fuel injected engines: E85
    up to 2380 FWHP – naturally aspirated
    up to 1820 FWHP – forced air induction
  • Carbureted engines: E85
    Up to 2520 FWHP – naturally aspirated
    Up to 1890 FWHP – forced air induction
  • Fuel injected engines: METHANOL
    up to 1,190 FWHP – naturally aspirated
    up to 910 FWHP – forced air induction
  • Carbureted engines: METHANOL
    Up to 1,260 FWHP – naturally aspirated
    Up to 945 FWHP – forced air induction
  • E85 Compatible, reduce max FWHP by 30%
  • Lighter than the traditional external mount pumps.
  • Reduced current draw at higher, EFI pressures.
  • Extended service life in methanol and ethanol.
  • New integral spur-gear pumping mechanism.
  • 90-PSI continuous operating pressure and up to 150-PSI peak pressure, base plus boost.
  • Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
  • This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications.
  • ORB-12 inlet and ORB-10 outlet ports.
  • Requires straight 12-VDC to 16-VDC power supply.
  • Not compatible with pulse modulated systems or fuel pump speed controllers.

Aeromotive’s True Variable Speed Controller offers the advantages of built-in pump speed control via a dedicated 0-5V analog DC input signal. The Controller capitalizes on our existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat the introduction of environmental via reduced fuel recycling.

EFI Rated flow of 1,700 lbs./hr. @ 40 psi, 13.5 volts
Carb Rated Flow of 1,850 lbs./hr. @ 9 psi, 13.5 volts

 

* This product is drop shipped directly from the manufacture. Please note that shipping times may vary.

$585.25

Original: $1,950.82

-70%
Brushless In-Line 5.0 Spur Gear Pump with Variable Speed Controller—

$1,950.82

$585.25

Product Information

Shipping & Returns

Description

*This product is manufactured to order. Expedited or express delivery is not available.

 

  • Fuel injected engines: GAS
    up to 3400 FWHP – naturally aspirated
    up to 2600 FWHP – forced air induction
  • Carbureted engines: GAS
    Up to 3600 FWHP – naturally aspirated
    Up to 2700 FWHP – forced air induction
  • Fuel injected engines: E85
    up to 2380 FWHP – naturally aspirated
    up to 1820 FWHP – forced air induction
  • Carbureted engines: E85
    Up to 2520 FWHP – naturally aspirated
    Up to 1890 FWHP – forced air induction
  • Fuel injected engines: METHANOL
    up to 1,190 FWHP – naturally aspirated
    up to 910 FWHP – forced air induction
  • Carbureted engines: METHANOL
    Up to 1,260 FWHP – naturally aspirated
    Up to 945 FWHP – forced air induction
  • E85 Compatible, reduce max FWHP by 30%
  • Lighter than the traditional external mount pumps.
  • Reduced current draw at higher, EFI pressures.
  • Extended service life in methanol and ethanol.
  • New integral spur-gear pumping mechanism.
  • 90-PSI continuous operating pressure and up to 150-PSI peak pressure, base plus boost.
  • Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
  • This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications.
  • ORB-12 inlet and ORB-10 outlet ports.
  • Requires straight 12-VDC to 16-VDC power supply.
  • Not compatible with pulse modulated systems or fuel pump speed controllers.

Aeromotive’s True Variable Speed Controller offers the advantages of built-in pump speed control via a dedicated 0-5V analog DC input signal. The Controller capitalizes on our existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat the introduction of environmental via reduced fuel recycling.

EFI Rated flow of 1,700 lbs./hr. @ 40 psi, 13.5 volts
Carb Rated Flow of 1,850 lbs./hr. @ 9 psi, 13.5 volts

 

* This product is drop shipped directly from the manufacture. Please note that shipping times may vary.

You May Also Like

-70%NEW
Thumbnail 1Thumbnail 2

FuelTech USA Flag T-Shirt

$25.00

$7.50

-70%NEW
Thumbnail 1Thumbnail 2

FuelTech T-Shirt

$25.00

$7.50

-70%NEW
Thumbnail 1Thumbnail 2

Pan Vacuum Sensor

$147.00

$44.10

-70%NEW
Thumbnail 1

ETM-1 Type K Thermocouple Controller

$109.00

$32.70

-70%NEW
Thumbnail 1Thumbnail 2

PS-10B Pressure Sensor (0-10 bar)

$129.00

$38.70

-70%NEW
Thumbnail 1Thumbnail 2

SparkPRO-5

$351.00

$105.30

-70%NEW
Thumbnail 1

Type K Miniature Thermocouple Connector

$7.00

$2.10

-70%NEW
Thumbnail 1Thumbnail 2

SparkPRO-6

$359.00

$107.70

NEW
Thumbnail 1Thumbnail 2

Water Temperature Sensor

$29.00

-70%NEW
Thumbnail 1Thumbnail 2

SparkPRO-8

$439.00

$131.70

NEW
Thumbnail 1Thumbnail 2

Air Temperature Sensor

$29.00

-70%NEW
Thumbnail 1Thumbnail 2

SparkPRO-4

$269.00

$80.70